Wallpacks & Sensors

Overview

The Wallpack in itself doesn't provide sensor solutions. There are a number of ways that the Wallpack can me configured to work with light and motion sensors. 

Non-Smart Sensors

The Wallpack  can be configured inline with an occupancy or day/night based center that operates power to the light. By using the suggested EZYLUX Defensor PIR sensors, the installer can attain motion control to turn Wallpack lights on/off by opening/closing the lighting circuit to the flood lights. They also have an inbuilt light sensor. 

Recommended model for common exterior applications: EM10025358 (DEFENSOR MD 200° 24 IR 1C IP55 WH) Note: 600W Max load per circuit. Purchased from: Wholesalers

Smart Sensors

The Wallpack can be configured to operate using Visionary's automation network 'VT-Link' which allows the Wallpack  to act as a controllable node point in a VT-Link network. The network can be configured with light and motion sensors which send instructions to the Wallpack to interact as instructed. 

Other Controls 

The Wallpack has product options to interface with DALI, 0-10V and PWM based networks that can provide dimming functions if the network has the needed accessories.