Products Using 0-10V Control Gear

Overview

0–10 V is one of the first and simplest electronic lighting control signaling systems. Simply put, the control signal is a DC voltage that varies between zero and ten volts.

In a typical lighting scenario, the 0-10V controller reduces the returned volts to the light to. If the controller returns the full 10 V, the light will be at its brightest level. The light will be at minimum level if no volts are returned. The (current sinking) scheme creates a fail safe situation, should a control wire be cut or the controller fail, the lights will illuminate at full birghtness.

The following table lists Visionary products that can be used on 0-10V networks if the control gear option is chosen;

Product	Interface
Revolution Highbay Families Insurgent Highbay Families Revolution Flood Families Avira and Hybrid Families Wallpack Families Bollard Families	0-10V Dim-to-off (selected products)

Frequently asked questions

Question	Response
Can i retrofit an existing 0-10V light fitting with a new one in a plug-n-play sense?	In most cases - yes. The 0-10V network is quite simple. Product performance is dependant on the way the network is configured and the control gear of the luminaire is bound by the voltage reading from the network to perform as intended.